Find something
useful or
Donations Appreciated!

Useful Research Links
Unit Conversions
US Patents
European Patents
Wayback Machine
Systran Translator
Technorati 13.6 million Blog Search
BugMeNot - Autofill registration pages with pseudo password
Currency Conversion
FREE! - FireFox & ThunderBird
BACKUP for Firefox/Thunderbird
Spy Sweeper
AVG Grisoft antivirus
Remove IE Browser


Don Lancasters
Guru's Lair

Files of Interest
Grebennikov Antigravity Platform
Magnetic Anomalies
Rectifying Chaos
Tilley Power System
CO2, warming & the need for Free Energy
Primer for Skeptics and Attackers
Boycott KeelyNet!
Self-Running PPM?
Terry Bastians' version of Gray Circuit
Bedini on Power Conversion Tube
Lindemann World of Free Energy
Press Release
Bogus, Erroneous Review
Inspiration page with several files
KeelyNet Alternative Science Museum
Funding the Future
Civilization in the 21st Century
The real 4th of July
DeLabs Electronic Experimenters Circuits



NEXUS article on
the Crock Machine
and the MexiStim
Polarity Cycler

reported to boost
energy levels!

KeelyNet Teeshirts

Setup your own electric generating systems

BlastIT Rife
Research Handbook

746 page, 5 pound
detailed book

High Voltage
& Free Energy Devices

experimenters handbook, covers low and high voltage as well as hydrogen generation projects

Book & Video

our assortment of books and videos we sell to help support KeelyNet - we take Visa/MC credit cards, PayPal or money orders, thanks!

The Hilden-Brand Magnetic motors
KeelyNet - 11/13/05

A couple of months ago, I (Jerry Decker) received an email asking if I was aware of a new discovery in magnetic motor technology by a Mr. Hildenbrand. I was not, but did a search on the net and found nothing.

I received this email on 11/11/05 and decided it would be worth posting to see if it might help Mr. Hilden-Brand, with his permission of course. If you can assist him or would like a demonstration, please contact him directly. Thanks!


My name is Jack W. Hildenbrand. I am 60 years old. Before I go any further, PLEASE read this e-mail in full, it would be very important to me.

About 15 years ago I was involved in a work related accident, got hit in the back of my head by a heavy industrial door. Well it left me paralyzed for several years and I found out the reason was that I had a birth defect call Chiari Malformation of the skull. Well that automatically put me into the State Disability Act and I have been unable to obtain a job ever since. The paralyzing effect only lasted about three years and I seemed to be good as new.

I had a little money saved up so I decided to install a small machine shop in my garage. I had been working on and off on a magnetic holding device before and I figured it would be a good time to continue working on it. Well I experimented with the device for several years and finally got it working the way I wanted it.

This device increases the holding power of an electro magnet to four times its original power. (See Emery/Leedskalnin Perpetual Motion Holder)

And also provides a way to turn a permanent magnet on or off to any external metal objects. (See Radus Magnetic Boots)

After experimenting with this new device I realized that it could also be used to generate power as in a motor. I then spent several weeks building a test device to see if this could be used to power an electric motor. The first motor I built was very small but worked exceptionally well. It produced about 1/16 hp and turned around 6000 rpm.

Also this motor proved to be very efficient, using only about 600 ma at 36 vdc. I also noticed with this motor that when the rpm was loaded down to around 500 rpm that the current did not increase much. The amps did not increase much above 1 amp. Now if you compare this to any current dc motor of comparable size, on motor loading the amps jumped up to around 20 amps.

Well I have since built two more motors of much larger size. One producing around 1/8 hp and a full radial motor that also produces around 1/3 hp. These larger motors have the very same characteristics as the small motor. Their current draw is very stable throughout the rpm range.

Now I have talked to several motor engineers about the type of materials I have been using as the magnetic medium. Now, of course, money has always been an issue when it comes to buying materials. The magnetic medium I have been using has been confiscated from old electric transformers.

Well I have since found out that the silicon steel from transformers is oriented strand silicon steel laminate...and that motors constantly change north/south polarity and will not run if built with oriented strand silicon steel. Well my motors are running on this steel but I have pretty good proof that efficiency would greatly improve if I could get hold of some of the non-oriented silicon steel.

Currently I would not have been able to build any of these motors due to my fixed income. In the beginning of this project I contacted some old friends that operate a motorcycle sales shop. They told me they could help up to a certain point. Well I have filed three patents at this point on the two different holding devices, the motor. I am currently perusing a generator patent using the same technology. Currently my friends have put out over $50,000 to cover the cost of patents and for buying materials.

Well this project has gotten to the point that larger amounts of money are going to be needed to continue. I currently would like to build a small golf cart type of car to test these motors in. From tests that I have run these motors would produce over 50% more run time per battery charge over current motor technology.

I have included several pictures of the motors I have built. One of these motors has proven to produce around 120% effiency and if built out of the correct non-oriented steel I'm sure would produce well over 160%. At that point I think I could produce a self running motor -generator.

I have looked all over the place for non-oriented silicon steel and at this point have not been able to obtain any of it. I have contacted several motor manufacturers but nobody seems to be interested to allow me to buy any of this steel. I have had offers to purchase large rolls of this steel from manufacturers (16 ton rolls) but the price is out of the question. Nowhere have I been able to buy small samples of this steel, like maybe 100-200 lbs. My question to you, "How in the world does a small time inventer like myself obtain the materials needed to build with?"

Click here to see full images on one page





Contact Jack
if you are interested in assisting
with funding this invention. Thanks!